Each toilet has a wax lining, which is a very important element in maintaining hygiene. Like everyone, the time will come when this wax seal will need to be replaced. Doing this as soon as possible will save you from many headaches. This is because leakage can damage both the toilet bowl and toilet seal, which are fairly expensive replacement parts. So how do you know when it is time to replace the toilet seat? Here are some signs you should pay attention to.

1. bad smell

One of the most characteristic signs indicating the need to replace the toilet seat ring is an unpleasant odor. If your toilet smells like sewage, no matter how often you wash the floors or spray odors, it’s time to look for the source of the smell. Most often, the smell comes directly from under the toilet itself.

2. The water around the base of the toilet

Now that you are probably holding your hands and knees and sucking around the toilet if you followed step 1 above, you should also touch the floor, especially the area around the base of the toilet. Moisture or water is a sign of a leak in the toilet, but do not panic yet. There may be condensation. If you find moisture or water,

3. A Moving Toilet Bowl

One way to find out that it is time to replace the toilet seal is to move the container. Even a little movement is a bad sign. What you need to do is hold the pot well and then shake well. Ideally, the bowl should not vibrate at all. If so, and even if this is just a small movement, then you should replace the wax seal.

If the toilet is on the floor of the house, check the ceiling directly under the toilet to see if the water is dripping or if there are signs on the ceiling. Remember that this can lead to mold that you do not want to have at home.

How to replace a toilet seal

One of the most common problems that many people encounter is the unpleasant odor coming from the toilet. Although the toilet may seem like an obvious place for unpleasant odors, your toilet should not have a permanent bad smell. If it turns out that you have this problem, then most likely, this is due to a broken gasket that causes a leak under the toilet. If the latter, you must first turn off the water supply to the toilet and then wash the toilet until the tank is empty. The remaining water is submerged.

Remove the covers and nuts from the bottom of the toilet. Disconnect the water pipe from the toilet. Gently push the toilet back and forth until you break the seal and seal. Remove the toilet. Now install the new gasket in place with the rounded side up and centered above the hole with the screws installed. Replace the toilet carefully. Now sit on it to help create a new print. Now reconnect the water supply line, reinstall the screws and turn on the water supply, and the problem should be resolved.

 

For more information, contact Vinny’s Jersey Plumbing, located in Wayne, New Jersey.  We also service other towns in New Jersey, such as Hawthorne, Lodi and Little Falls.