Short cycling occurs when a furnace switches from on to off frequently. The term refers to the short period of time in which the device works. The causes of short cycling can be different.

For example, it is possible that the furnace is too big for the ductwork. You have to keep in mind that a particularly large device consumes correspondingly more energy. If the device is too large, it can lead to an uneven air distribution. This means that some rooms in your home will heat up faster than others. It is also possible that the device needs to be repaired or serviced. If the furnace is not regularly maintained, a short circuit can quickly arise, which leads to short cycling. One of the most common causes is a dirty filter. This means that the airflow cannot work properly. An incorrect placement of the thermostat can also be the cause. Therefore you shouldn’t be randomly placing a thermostat anywhere in your house. If it’s, for example, in direct sunlight, this can of course affect the temperature display.

Does short cycling have a negative effect on your furnace?

Of course, the constant switching on and off of the furnace over time leads to a heavy load on the systems.In the long run, it has a negative effect on the service life of the furnace. In addition, the device also uses a lot more energy and thus electricity. You will end up paying a lot more money. It is therefore important that you correct the problem and have the oven repaired immediately. If this is not done promptly, further disadvantages can occur.

Another problem would be, for example, damage to individual parts of the furnace. Short cycling not only puts a strain on the furnace as a whole, but also on the individual parts, which wear out faster as a result. This then leads to the device having to be repaired more frequently. There also won’t be the same temperature in every room in your house. Because the furnace turns on and off often, some rooms cool down faster. Especially in larger houses with several rooms, this becomes particularly uncomfortable in the long run.

Overall, it shows that short cycling doesn’t immediately mean that your furnace is broken. Nevertheless, there is a need for action to prevent consequential damage. Overall, it is therefore important that you have your equipment serviced regularly to prevent short cycling and other problems.

 

For more information, contact Vinny’s Jersey Plumbing, located in Wayne, New Jersey.  We also service other cities in New Jersey, such as Verona, West Orange and Parsippany.